How To Make Super Glue Dry Faster

Super glue dries quickly since it’s such a powerful substance.

Fortunately, there are many ways you can make this sticky substance faster. If super glue seems slow to dry out, it’s because it still has work to do.

So, how do you make super glue dry faster? Well, you can let the glue dry naturally, but that takes a long time.

You can also apply heat to a glue puddle to speed up the drying process. This will speed up the process, but the glue will be too sticky to use after that.

Finally, you can scrape the glue into a bowl and let it dry naturally. This will speed up the process and also make it easier to use again.

However, the glue will be sticky after it’s dried.

What is Super Glue?

Superglue, commonly known as cyanoacrylate glue, is one of the strongest adhesives available and is used to hold items together that are hard to fasten with ordinary adhesives such as tape or nails.

It is a type of adhesive called a fast-acting adhesive because it becomes very strong when applied quickly to surfaces that need to be held together temporarily or permanently.

It became popular in the late 1950s due to its ability to bond almost anything together and because of its fast setting time.

It’s best used in situations where you need a strong bond, but you don’t intend to use the fastened item for an extended amount of time because it can dry out and break apart over time.

The glue is heated until the carbon black becomes fluid and then applied to a surface to be bonded.

How Strong Is Super Glue?

Super glue is a typical adhesive and is rated at 5 out of 10 on the strength scale.

Most super glues are quite powerful when used correctly, but some formulas can be weakened by exposure to light or heat, or by water.

The strength of Super Glue, on the other hand, makes it very suitable for bonding wood to metal, glass to plastic and plastics to themselves.

The maximal strength of superglue is normally approximately 30 % of that of the metal being glued.

How Long Does It Usually Take for Super Glue to Dry?

Superglue is a quick-drying adhesive, however the drying time depends on the formula being used and the amount of surface area that is glued.

As a general guide, most superglues take between 15 seconds and a minute to become completely dry when bonding materials with a surface-area-to-volume ratio of around two to one or less.

For instance, if two grams of liquid are spread over a one-gram area, the drying time is two minutes.

Super glue takes anything from a few minutes to an hour to dry completely.

How To Make Super Glue Dry Faster

Work in a hot environment

Super glue was invented in 1942. It quickly gained popularity because compared to other glues, it’s strong, fast-acting, and easy to use.

However, it takes a long time to dry. This can be frustrating, especially when working with super glue in hot weather.

Fortunately, there is a way to speed up the super glue drying process — add heat. Just add super glue to a microwave-safe bowl and heat it up for 30 seconds at a time to speed things up.

Use a Fan

If you have some super glue, you can make a fan to dry it faster.

Just put some glue on a popsicle stick and stick it in a glass of water or on a fan. The fan will blow air across the glue and evaporate the solvent, which speeds up the drying process.

You can also make glue faster by warming it up in an oven for 5 minutes at 250 degrees. However, using an oven makes the glue less strong.

Clean the Parts Before Gluing Them

Super glue is an amazing product that can be used to fix many things.

However, super glue can only be effective if the parts are dry and clean. If the parts are wet or dirty, the glue may not stick properly.

Therefore, it’s crucial to clean the parts before gluing them. This can be done by wiping off any dirt and debris with a cloth or paper towel and drying the parts thoroughly.

Finally, it’s important to let the parts dry completely before gluing them. This will allow the glue to dry faster and prevent it from sticking to the wet parts.

Spray Isopropyl Alcohol on the Surface

You can apply isopropyl alcohol to make super glue dry faster.

Simply spray the alcohol onto the surface and let dry. The alcohol will evaporate quickly and leave a super glue film on the surface.

This will increase adhesion and make the glue dry faster. However, this method only works for super glue, not regular glue or other adhesives.

Add Baking Soda on the Superglue

Superglue is notorious for having slow drying times.

However, you can speed it up by sprinkling baking soda on the glue. Baking soda neutralizes the acid in the superglue, allowing it to dry faster.

The glue becomes dry in about 10 minutes. However, this method only works with superglue.

Also Read:What Happens if you Eat Super Glue?


In conclusion, to make super glue dry faster, make a small puddle of glue on a piece of white paper. Then, place the puddle of glue in a sunny spot and watch it dry. This should take about 30 minutes or so.

Super glue is an excellent adhesive for fixing things around the house, but it takes a while to dry. Fortunately, there are ways to speed up this process and make your projects go quicker.

You may drastically minimize drying time with heat, evaporation, adding baking soda, and more.

Test them thoroughly before using them on a project where you’ll be waiting for a long time for the adhesive to dry.

Always exercise care while working with superglues.